Error code 5200 means that some printer error has occurred. In such a situation, firstly, check the remaining ink level. If it is low, then refill the ink tank. Then turn off the printer and make sure to unplug it. You’ll have to wait for fir about ten. You can then plug in the printer again. After that, switch on the printer. If this doesn’t work in solving g7020 support code 5200, then you should perform an ink flush. Hopefully, it’ll solve your problem easily
top of page
To see this working, head to your live site.
What Do you mean by canon g7020 support code 5200
What Do you mean by canon g7020 support code 5200
1 comment
Like
1 Comment
bottom of page
When Canon error code 5200 occurs, you cannot print further. Hence, it is necessary to identify the reason behind the error and troubleshoot it. If you are facing the Canon Printer code 5200, and are looking for effective ways to resolve the issue, follow the various methods listed below and get started with your printer again:
1st Method: Resetting the Canon Printer
Here, you need to perform a printer reset by following the steps mentioned below:
Switch off your printer to start resolving the code 5200 Canon Printer.
Press and hold the stop button on the printer.
Press and hold the Power on button.
While you hold on the Power button, release the stop/reset button on the printer.
Press the stop/reset button twice while holding the Power button.
Wait until the printer displays an “idle message”.
Once you see the “idle” message, open the top cover of the printer to expose the ink cartridges.
Lift the cartridge cover holder and remove the Black and Color cartridges from the printer.
Place the cartridge holder back to its original position.
Replace the top cover of the printer to its initial position and switch on the printer.
Once the printer initializes, replace the cartridges to their position.
Check whether the 5200 error on Canon Printer has been resolved or not.
2nd Method: Installing Repair Tools
Another method to resolve the Canon code 5200 is by installing the repair tools on your computer. There are numerous repair tools readily available on the internet along with the tool that can be used for resolving Canon Printer error 5200. The installation of such tools simply requires you to follow the on-screen instructions during the installation process.
3rd Method: Restarting the Printer
One of the effective methods to troubleshoot Canon error code 5200 is by restarting the printer. When you notice the 5200 Canon Printer error, simply turn off the printer and remove the power cable first. After about five minutes, plug in the power cable and switch on the printer. Lastly, check if the printer code 5200 is resolved or not.
4th Method: Cleaning the Print Head
Switch off the printer.
Lift the cover and remove the ink cartridges and the print head.
Clean any debris on the print head and replace it back to the original position.
Switch on the printer and check whether the error code 5200 Canon Printer is resolved or not.
Regards,
Rachel Gomez